Synchrotech Two Slot PCMCIA Card Read-Writer with Databook Chipset (PCM-CR-I2ID) FAQ

Contents
Technical Data
Jumper Settings
Basic Configurations (Win 95/98)
Downloads

Q1: Technical Data

Interface: 16-bit ISA
Chipset: DataBook DB86072 or DB86082
Card Socket Type:
  • 2 Type I or
  • 2 Type II or
  • 1 Type I/II and 1 Type III or
  • 1 Type III
Supported Operating Systems: DOS, Windows 3.x, Windows 95/98, Windows NT 3.51/4.0, OS/2 Warp 4
Configuration Modes: Hardware jumpers, Software settings

Q2: Jumper Settings

Two Pin Configuration
I/O Port Jumper
200 JB200
240 JB240
280 JB280
2C0 JB2C0
300 JB300
340 JB340
380 JB380

Three Pin Configuration

I/O Port JB300 JB301 JB302 JB303 JB304 JB305
100 2-3 2-3 2-3 2-3 1-2 2-3
110 1-2 2-3 2-3 2-3 1-2 2-3
120 2-3 1-2 2-3 2-3 1-2 2-3
130 1-2 1-2 2-3 2-3 1-2 2-3
140 2-3 2-3 1-2 2-3 1-2 2-3
150 1-2 2-3 1-2 2-3 1-2 2-3
160 2-3 1-2 1-2 2-3 1-2 2-3
200 2-3 2-3 2-3 2-3 2-3 1-2
210 1-2 2-3 2-3 2-3 2-3 1-2
220 1-2 2-3 2-3 2-3 2-3 1-2
230 1-2 1-2 2-3 2-3 2-3 1-2
240 2-3 2-3 1-2 2-3 2-3 1-2
250 1-2 2-3 1-2 2-3 2-3 1-2
260 2-3 1-2 1-2 2-3 2-3 1-2
270 1-2 1-2 1-2 2-3 2-3 1-2
300 2-3 2-3 2-3 2-3 1-2 1-2
310 1-2 2-3 2-3 2-3 1-2 1-2
320 2-3 1-2 2-3 2-3 1-2 1-2
330 1-2 1-2 2-3 2-3 1-2 1-2
340 2-3 2-3 1-2 2-3 1-2 1-2
350 1-2 2-3 1-2 2-3 1-2 1-2
360 2-3 1-2 1-2 2-3 1-2 1-2
I/O address 240h is the default factory setting. Do not change unless absolutely required

Q3: Basic Configurations (Win 95/98)

Basic Configuration Input/Output IRQ
0 0240-024F * 03 *
1 0240-024F *  
All "*" items are capable of being manually changed through Change Settings. IRQs that can be selected are 3, 4, 5, 7, 10, 11

Q4: Downloads

CARD316A.EXE CardTalk Installation Software
1.33MB Version 3.16A (AT)
09/19/97
  • DOS and Windows 3.x Card & Socket Services
PCM-CR-I2ID.zip PC300 INF for Windows 95/98
4.69K
09/19/97
  • Windows 95/98 INF file
  • Requires Windows 95/98 diskettes or CD for installation of 32-bit Card & Socket Services
NT4SP3_I.EXE Windows NT 4.0 Service Pack 3
17.57MB Intel 386 family processors
  • Recommended installed for use with Windows NT 4.0
  • NT 4.0 SP3 README.TXT
SP3_351I.EXE Windows NT 3.51 Service Pack 3
7.7MB Intel 386 family processors
  • Required for using the PC300 in Windows NT 3.51
  • NT 3.51 SP3 README.1ST
SP4_351I.EXE Windows NT 3.51 Service Pack 4
10.1MB Intel 386 family processors
  • Required for using the PC300 in Windows NT 3.51
  • NT 3.51 SP4 README.1ST

Synchrotech's Tech Support Department

Valid HTML 4.01 Valid CSS RSS/XML Feed Follow us on Twitter Support